China's economy has developed rapidly, and the standard of living of the people has also improved markedly. Of course, there is a higher pursuit of quality of life. How can we make the daily trivial housework occupy us too much time? The emergence of automatic sweeping robot has helped us solve this problem. It can complete the indoor cleaning work automatically or semi-automatically by means of autonomous intelligent algorithm. It basically does not require too much manual intervention and is a good assistant for household cleaning.
The job of the automatic sweeping robot is to sweep the floor, and sweeping it is not the most important issue. As we all know, the motor is a key factor affecting the cleaning ability of the cleaning robot, but few people will consider the importance of the cleaning component. The type and material of the cleaning component will affect the final cleaning effect of the sweeper. Today, the author will do a simple analysis for the cleaning components of the automatic sweeping robot, and hope to provide some reference.
In general, the cleaning components used in the automatic sweeping robot are as follows: single suction port, multi-main brush cleaning assembly, sweeping and inverting cleaning assembly, and side brush.
[sucking mouth]
The suction port assembly used in the automatic sweeping robot is divided into three types: a floating single suction port, a fixed single suction port and a small suction port. The floating single suction port can be floated up and down according to the unevenness of the ground, so that the suction port is close to the ground, and the dust and granular garbage are sucked in seconds; the single suction port is fixed, because the suction port has a certain distance from the ground, the suction force is weak, and the cleaning ability of the micro dust is relatively Poor; small suction, concentrated suction, but the area of ​​the attachment is small, I generally do not recommend the sweeper to choose this suction.
[Multi-main brush cleaning component]
The mainstream multi-main brush cleaning assembly is designed with a V-shaped brush design and a clip-on brush design. V-type brush design has the largest area for single cleaning, and it has strong cleaning ability for smooth floor and ordinary floor. The cleaning effect of clip-on brush on long-haired carpet is good, and it is suitable for home environment with carpet. In addition, the material selected by the main brush directly affects the service life. It is recommended to use the material of nylon fiber brush + metal main brush holder. The advantage is that it is not entangled and easy to clean.
[Sweeping frequency conversion cleaning component]
Some automatic sweeping robots are equipped with a sweeping and suctioning frequency cleaning unit, that is, a method of switching between the suction port and the roller brush. For the ground condition with many hairs, the floating suction port assembly is selected. The machine automatically increases the suction force by 25%-30% through the ESB detection device, and the hair can directly enter the dust box, which can avoid the trouble of secondary cleaning; In the case of large amounts of large debris such as paper scraps, the roller brush assembly can be used for quick and effective cleaning. At present, the brand of sweeping and suction frequency cleaning components in the automatic sweeping robot market is only Taiwan Pusangnik.
[side brush]
At present, the automatic sweeping robots on the market are equipped with side brushes, and the materials generally use nylon fibers, and the number of uses is not the same. Some brand sweepers use a single-sided brush design, while others have a bilateral brush design. When cleaning along the edge and corner, the two designs don't seem to make much difference, but in the garbage gathering, the bilateral brush is better. The combination of the bilateral brush and the subsequent suction or roller brushing can achieve better cleaning effect, and the cleaning efficiency will naturally be higher. Therefore, the author recommends the automatic sweeping robot designed by the bilateral brush.
Industrial Dtu,Industrial 4G Dtu,Industrial 2G 3G Module 4G Dtu,4G Industrial Modem Dtu
Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommiot.com