Application of residual current protection device in charging pile

Application of residual current protection device in charging pile

Introduction: As the world's largest consumer of new energy electric vehicles, the rapid development of new energy electric vehicles, as the top priority of electric vehicle charging pile safety issues: that is, whether the electric car charging pile can be avoided during the charging process The accident caused by plugging and unplugging the charging gun can automatically shut off the power after the charging is completed. It can insulate and avoid electric shock during rainy days. This is a problem for many electric vehicle users.

Charging power supplies or charging posts are gradually becoming popular in society and homes. Whether they are used indoors or outdoors, their safety protection must be indispensable. The highest DC voltage can reach 750VDC, and individual lightning protection modules 10/20KA will also be considered. With the emergence of national standards, various products used for safety protection need to be able to better perform overcurrent protection.

Although circuit protection is only a small part of the design in industrial products, it is a very important and critical design, because the protection device or protection product is usually at the entrance, such as the input port of the power supply. Once the protection device has a problem, the entire system It cannot be used in time, so protecting the design's accuracy and efficiency becomes more and more important.

To this end, Xiamen Yingrui Fengte has developed a residual electric protection device dedicated to the charging pile device - the residual current monitor for YRM1 equipment, which can be directly installed on the charging pile and other types of electrical equipment control boards. The dedicated residual current monitoring device can monitor the alternating current and residual current containing DC components in the power equipment such as the charging pile and the subsequent facilities, and provide supplementary protection against personal electric shock. When a ground fault occurs in the system, the signal of the product is output to Other controllable units in the device, the control unit controls other devices to break the fault circuit and issue warnings.

Source: Xiamen Yingruifeng Electronic Technology Co., Ltd.

Bolt

Hex bolts made of zinc plated steel or stainless steel,are available in diameter from 6mm to 24mm and ideal for construction and repair.

Tap bolts with hex heads and fully threaded shanks,are extensively used in boat building,exterior woodworking and water treatment areas,etc.

Countersunk bolts,made of grade 4.8 and 8.8 steel,are available with slot,cross and hex holes in their heads and used when a flat surface needed.

Hex Nuts matching with Hex bolts,are made of quality low carbon or stainless steel,are available in standard,heavy type,jam and panel types.we have many kind of Screw bolt nut:carbon steel hex nut,flange nut,stainless steel lock nuts,stainless steel hex nuts(m2-m48),DIN934,DIN439 marks,hex nuts,flange nuts,DIN6923/GB6177,stainless steel and carbon steel lock nuts,length of 20,flange nut m20,hex flange nut,factory stainless steel cage nut with HIGH-reputation in,wing nut DIN315.

1.Material ; caron steel ,Alloy steel ,

2.:Size : M3-M100

3.Color : Black ,Color -plated zinc ,Copper plated ,hot dip galvanized

4. Standard : DIN/ANSI B18.2.1 /JFI/JIS

5 Certificate : ISO9001 : 2008 ISO/TSI6949,2009

6.Specification : Dia M3-M100, length :20mm-300mm





Hex Bolts,Round Head Bolts,Socket Bolts,Flange Bolts,Countersunk Bolts

BAODING JIMAOTONG IMPORT AND EXPORT CO., LTD , https://www.chinagroundscrew.com