Development and application of vehicle audio-visual and GPS technology
Development and application of vehicle audio-visual and GPS technology
ã€ADI-AD7147】
Product specification
. Single Supply OperaTIon Vlotage ─ 2.7V ~ 3.3V . Low supply current ─ 1.5mA maximum . OperaTIng Temp Range ─ -40 ~ +105 . Packages ─ LFCSP_VQ
Product Features
. Programmable capacitance to digital converter . 13 capacitance sensor inputs . 36ms update rate . No external RC components Required . On-chip automaTIc calibraTIon logic . SPI (AD7147) or I2C (AD7147-1) compatible serial interface . 2.7 to 3.3V supply Voltage
Applications
. cell phones . personal music and multimedia player . smart hand-held devices . television, A / V and remote controls . gaming consoles . digital still cameras
ignored by settings
All functions of the AD7147 are integrated on a printed circuit board. This new capacitor-to-digital converter is ideal for ultra-thin mobile electronic devices. The configurable AD7147 capacitor-to-digital converter has 13 capacitor inputs and fF-level resolution, allowing mobile electronic device designers to implement touch mouse pads, scroll wheels, sliders, and up to 36 buttons. In addition, the AD7147 also adds active shielding technology to protect it from capacitor-grounded pickups and other noise sources in the system, thus allowing designers to freely place sensors away from the main integrated circuit of the system.
The analog front end of the AD7147 has been improved. Compared with the traditional AD714x products, the sensor response is increased by 3 times. The improved response allows end users to experience more precise finger navigation and improved component performance, while continuing to provide designers with per-channel sensitivity adjustments for sensor fine-tuning. The AD7147 includes a built-in sensitivity algorithm to compensate for changes in temperature and humidity to ensure that users with different finger sizes receive the same sensor performance as the response.
In full power mode, the AD7147 usually consumes 1mA; in low power mode, it consumes only 50μA. This is 20% lower than competing products in the market. In addition, the AD7147 has the industry's lowest shutdown current, only 2μA.
The AD7147 includes a serial interface compatible with SPI, and the AD7147-1 includes a serial interface compatible with I2C. Samples of both components are available now, and mass production will begin in July 2007. Both products are available in 24-pin 4mm × 4mm LFCSP packages.
ã€ADI-AD7879】
Product specification
. Supply Power Voltage ─ 2.7 ~ 3.6V . Touch screen interface ─ 4 wire . ADC bit solution ─ 12bit . Battery Monitor ─ 0.5 ~ 5V
Product Features
. Interrupt output . Wake up on touch function ─ '-40 ℃ ~ + 85 ℃ . Package ─ 3mm x 3mm LFCSP
Applications
. Portable product
ignored by settings
The AD7879 has a built-in 12-bit ADC that can support a 4-wire touch screen and can operate from 2.7 to 3.6V. It also has a built-in accurate 2V reference voltage and temperature detector to help developers save external parts. The output can effectively reduce the load of the MCU. The AD7879 also provides battery detection, and the detection range is 0.5V ~ 5V.
ã€ADI-ADIS16255】
Product specification
. Measurement Range ─ ± 80 to ± 320 ° / S . Sensitivity ─ 0.018 ° / S / LSB . Noise Density ─ 0.05 ° / S / rtHz . Temp Sensor ─ Yes . Voltage Reference ─ Yes . Support Current (max) ─ 8mA
Product Features
. Operating Temperature Range: -40 ℃ to + 85 ℃ . LGA 11.1mm x 11.1mm package
Applications
‧satellite navigation
ignored by settings
ADIS 16255 is a three-axis angle detector developed by ADI integrating MEMS technology. Improve the iMEMS sensor technology of analog devices by using an embedded signal processing solution. The built-in temperature detector of ADIS16255 provides accurate temperature calibration. Provide developers with a system-ready device to reduce development time, costs, and program risk.
ã€ADI-ADIS16355】
Product specification
. Measurement Range ─ ± 75 to ± 300 ° / S . Sensitivity ─ 0.018 ° / S / LSB . Noise Density ─ 0.05 ° / S / rtHz . Temp Sensor ─ Yes . Voltage Reference ─ Yes . Support Current (max) ─ 33mA
Product Features
. Operating Temperature Range: -40 ℃ to + 85 ℃ . LGA 23mm x 23mm x 23mm Mod
Applications
. satellite navigation
ignored by settings
ADIS 16355 is a three-axis angle detector + three-axis gravity accelerometer developed by ADI integrating MEMS technology. Improve the iMEMS sensor technology of analog devices by using an embedded signal processing solution. The built-in temperature detector of ADIS16355 provides accurate temperature calibration. Provide developers with a system-ready device to reduce development time, costs, and program risk.
ã€ADI-ADV7180A】
Product specification
. Differential Phase ─ 0.6 degrees . Differential Gain ─ 0.5% . Resolution (Each ADC) ─ 10bit . Analog Front-End Crosstalk ─ 60dB . Horizontal Lock Range ─ ± 5% . Vertical Lock Range ─ 40 ~ 70Hz . Fsc Subcarrier Lock Range ─ ± 1.3KHz . Vertical Lock Timw ─ 2 fields . Autodetection Switch Speed ​​─ 100 line . CVBS Analog Supply Current ─ 33 mA . S-Video Analog Supply Current ─ 59 mA . Y / Cb / Cr Analog Supply Current ─ 77 mA . Total Power Dissipation in Power-Down Mode ─ 15 uW
Product Features
. Support 3/6 channel analog signal input. Support NTSC / PAL / SECAM image specification automatic detection. CVBS / S-Video / Y / Cb / Cr image format input. CTI / DNR image enhancement adjustment. 5-wire comb wave filter. A set of ultra high speed 10bit ADC
Applications
. Car TV / Personal Multimedia Player / Image Surveillance System
ignored by settings
The ADV7180 is the first low-price video decoder released by ADI but provides high-quality video output. The ADV7180 provides a ladder-shaped filter at the front end of the input. The developer does not need an additional filter. The ADV7180 also provides DNR / CTI image enhancement output Adjustment, ADLLT is the only one in the world to provide strong support for developers to deal with weak signals. The built-in intelligent image processor of ADV7180 makes ADV7180 more simplified in control, and only needs to set a few registers to output high quality. Video, rewrite the complicated and complicated setting procedure of the video decoder.
ã€ADI-ADXL335】
Product specification
‧Measurement Range ─ ± 3g ‧Sensitivity ─ 300mV / g ‧Noise Density ─ 280ug / √Hzrms
Product Features
‧Operating Temperature Range: -20 ℃ to + 70 ℃ ‧LFCSP 4mm x 4mm package
Applications
. satellite navigation. Mobile phone. PMP . Digital photo frame
ignored by settings
The ADXL335 can support 3-axis gravity acceleration output, the highest detection of ± 3g gravity acceleration. The operating voltage can support a low voltage of 1.8 ~ 3.6V. The ADXL335 uses a static capacitance sensing design, so power saving and low noise are the basic features. The 4mmx4mm LFCSP packaging is very suitable for portable products.
ã€ADI-ADXL345】
Product specification
. Measurement Range ─ ± 2g . Sensitivity Change due to Temperature ─ ± 0.02% / ° C . Noise Density ─ 200μg / √Hz . Measurement Mode ─ 100Hz . Operating Voltage Range (VS) ─ 2.4V ~ 3.6V . Standby Mode Leakage Current ─ 1.5uA
Product Features
. CEC controller and buffer reduces system overhead. . Supports xvYCC functionality . Auto input video format timing detection (CEA-861D) . Single 1.8V power supply . Operating Temperature Range: -20 ℃ to + 70 ℃ . 3 mm × 5 mm × 1.45 mm LFCSP package
Applications
. Portable imaging products. Mobile phone. PMP . Digital camera
ignored by settings
ADXL345 is ADI's first gravity acceleration detector with digital output. To facilitate the use of ADXL345, it supports I2C / SPI and interrupt output, which can effectively reduce the load of MCU. The 3mm x 5mm small package is very suitable for portable products.
. Analog Supply voltage ─ 1.8 ~ 3.6V . Digital Core Supply voltage ─ 1.8 ~ 3.6V . Digital I / O Supply voltage ─ 1.8 ~ 3.6V . DAC SNR ─ 98dB . ADC SNR ─ 98dB . Package ─ 5mm x 5 mm MMLFCSP
SSM2602 is a low-power, high-quality stereo audio codec that is easy to carry digital audio applications. It features two sets of 24-bit A / D converters and two sets of 24-bit D / A converters. SSM2602 can be used as a master or a slave with various master clock frequencies. It includes 12 or 24 MHz for USB devices, or standard 256 fs ratios like 12.288 MHz and 24.576 MHz. Different audio sampling rates can support 96KHz, 88.2 KHz, 48 KHz, 44.1 KHz, 32 KHz, 16 KHz, 8 KHz. The SSM2602A can operate as low as 1.8 V for the analog part and 1.5 V for the digital part. And the maximum power supply voltage is all supply 3.6 V.
ã€ATMEL-ATR0622】
Product specification
The advantages of the chip include small size and low power consumption, which can be executed at 62mW, but its power-saving mode and built-in power management capability can reduce power consumption to 5 microamperes, making power-critical applications such as mobile devices Extend working hours without diminishing functionality. ATR0625 samples in 56-pin 8 × 8mm QFN packages are available now. Atmel can also provide antenna reference designs.
Product Features
SuperSense adopts continuous and discontinuous tracking technology, as well as different merge times for personal satellites; it can achieve super tracking sensitivity of 158dBm. Atmel said that the ATR0625 is available in a low-cost QFN56 package, and the pins are compatible with the ATR0622 ANTARIS 4 baseband integrated circuit with standard ROM software. Like all ANTARIS 4 chipsets, the ATR0625 supports WAAS / EGNOS and integrates a time to first fix (TTFF) as low as four seconds and an advanced assisted global positioning system (A-GPS).
Applications
ignored by settings
Atmel introduced a base frequency chip ATR0625 with SuperSense GPS weak signal tracking software built in read-only memory (ROM). The chip is based on the low-power, 16-channel global positioning system technology ANTARIS 4 platform. It can be used in equipment such as car navigation, mobile phones, personal digital assistants, personal navigation devices and entertainment consumer products.
I want to contact the staff of the World Peace Group China ATMEL product line
I want to contact the staff of Pinjia Group China AU product line
ã€AU-A061FW01V0 / A070FW03V8】
Product specification
6.1 "/ 7" Wide TFT LCD
Product Features
Analog / RGB Stripe interface / PSIA
Applications
Car, after market, MP now
ignored by settings
‧7 "mainstream product resolution 480 * 234, brightness 400nits ‧Suitable for rear loading machines, currently designed and used in domestic customers Foryou / Skypine / Coagent / Freeway, etc. ‧6.1 "family regulations product resolution 480 * 234, brightness 375nits (design parameters equal to C061FW01V0) ‧Suitable for rear loading machines, currently designed and used in domestic customers Foryou / Skypine / Coagent / Freeway, etc. It is highly recommended to replace PVI 6.2 "products
I want to contact the staff of Pinjia Group China AU product line
ã€AU-A061VW01V0 / AUO A070VW05V2】
Product specification
6.1 "/ 7" Wide TFT LCD
Product Features
Digital / TTL interface / PSIA
Applications
Car, after market, MP now
ignored by settings
‧Resolution 800 * 480, brightness 375nits ‧Suitable for rear loading machines, currently used in domestic customers Foryou / Skypine / Coagent / Freeway, etc.
I want to contact the staff of Pinjia Group China AU product line
ã€AU-C061FW01V0 / C070FW03V0】
Product specification
6.1 "/6.95" Wide TFT LCD
Product Features
Analog / RGB Stripe interface / PSIA
Applications
Car, before market, MP now
ignored by settings
‧Resolution 480 * 234, brightness 500nits ‧Suitable for front loading machines, currently designed and used by domestic customers Foryou / Skypine / Coagent / Freeway, etc. ‧Highly recommended for replacing PVI 6.2 "products
I want to contact the staff of Pinjia Group China AU product line
ã€AU-C070VW02V0 / C070VW03V0 / C080VW02V0】
Product specification
6.95 "/ 7" / 8 "Wide TFT LCD
Product Features
Digital / TTL interface / PSIA
Applications
Car, before market, MP now
ignored by settings
‧Resolution 800 * 480, brightness 500nits ‧Suitable for front loading machines, currently designed and used in domestic customers Foryou / Skypine / Coagent / Freeway, etc.
I want to contact the staff of Pinjia Group China AU product line
ã€Fairchild-FMS6151】
Product specification
. 5th order 8MHz (SD) fi lter . Power down to 25nA . Fixed gain of 6dB . Small, lead-free, Micropak® packaging
Product Features
. DC-coupled input . AC- or DC-coupled output . DC coupled output eliminate need for AC-coupling cap . SAG correction reduces size of AC-coupling cap
Applications
. Digital Still Cameras, GPS, Car TV
ignored by settings
FMS6151 operating voltage is 2.7V to 5V; its DC-coupled input can simplify the use of video DAC (Digital Analog Converter) interface; the component can choose AC or DC-coupled output to improve design flexibility; because the DC-coupled output does not require AC coupling Capacitors can therefore reduce costs and prevent "tilt" of video signals. The use of SAG correction at the AC-coupled output can reduce the size and cost of the required capacitance; and the 75-ohm cable driver saves the need for external drive components.
Driving a composite video signal from a mobile phone to a TV or other large display screen is one of the most popular applications, but when this signal conversion is performed, the frequency noise generated by the DAC reconstruction process may in turn affect the video image. To improve image quality, the FMS6151 video filter driver uses a fifth-order Butterworth low-pass filter, which can provide better stop band attenuation than typical second- and third-order solutions.
I want to contact the staff of Worldchild Group China Fairchild product line I want to contact the staff of Pinjia Group China Fairchild product line
CMMB receiving chip‧Comply with CMMB standard: GY / T 220.1-2006 and GY / T 220.2-2006 ‧Support BPSK, QPSK, QAM-16 modulation modes‧Dual integrated 60MHz ADC, support zero intermediate frequency, 1st IF, low intermediate frequency, and digital input‧Error correction code algorithm with independent intellectual property rights, support LDPC error correction code mode 1 / 2,3 / 4 ‧Support dual logical channels, picture-in-picture function, fast channel switching ‧Support SPI and SDIO host interface ‧Mature software driver and middleware Tuner ‧Zero IF conversion architecture ‧Support complete UHF band (470MHz to 860MHz) ‧AGC dynamic adjustment range: -102 to 0 dBm ‧Integrated fast fractional-N PLL, low phase noise VCO ‧Baseband low-pass filter with adjustable bandwidth‧High performance, high sensitivity‧Low power consumption
I want to contact the staff of the Worldof Group China Innofidei product line
ã€Innofidei-IF202】
Product specification
IF202 is the second generation of Innofidei's highly intergrated sigle-chip OFDM receiver for China Mobile Multimedia Broadcast (CMMB) receiver system, including RF U-band Tuner and demodulator. Compared with IF201, it provides a much smaller footprint package and lower power consumption, critical to the space and power constrained mobile devices. IF202 is suitable for a variety of mobile broadcast reception terminal, such as mobile phone, PDA, PMP, Notebook and portable digital TV device.
Product Features
◎ Demodulator ․ Compliant with CMMB Standard: GY / T 220-1-2006 and GY / T 220.2-2006 ․ Low-power Consumption: 16mW (demodulator) and 12mW (tuner) ․ 60-MHz Integrated PLL. ․ Dual ADC Integrated. ․ SPI Host interface (Slave Mode) for data transfer and firmware update. ․ 12C (Slave Mode.) ․ SPI EEPROM Interface (Master Mode) ․ SDIO interface (Device) ․ Embedded CPU with 256 Bytes Data Ram. 24K Bytes Instruction Memory (RAM). And 8K Data memory (External Memory) ․ Support BPSK, QPSK, QAM-16 Modulation Mode. ․ Support LDPC Error Correction of mode 1 / 2,3 / 4 ․ Propietary MMIS protocol. ․ On Chip De-multiplexing and filtering ․ TFBGA100 Packag. ․ Reference board and firmware provide ◎ RF Tuner ․ Zero-IF Sigle conversion architecture which eliminate all SAW filters. ․ Covers entire UHF band (470MHz to 860MHz) ․ AGC dynamic range: -102 to 0dBm ․ Fast fractional-N PLL, low phase noise VCD ․ Bandwidth adjustable base-band low-pass filter ․ Very high performance, sensitivity -99.5 dBm in QPSK 1/2 LDPC ․ Very low power consumption.
Applications
․ Mobile Multimedia terminal. ․ Cellular phone, PDA. ․ PMP (Personal Multimedia Portable) ․ PND (Portable Navigation Device). ․ Laptop computer. ․ UMPC (Ultra Mobile Personal Computer). ․ MID (Mobile Internet Device).
ignored by settings
IF202 has outstanding channel performance and Doppler compensation designed specifically for multimedia broadcast receiver of CMMB standard. IF202 also provides best echo performance making it ideal for operation in the (single frequency network) SFN and (multi-frequency networks) MFN environments. The patented error correction algorithm with the LDPC further increase BER performance and improve the overall system robustness under fixed and mobile environment.
I want to contact the staff of the Worldof Group China Innofidei product line
ã€Innofidei-IF303】
Product specification
Today's mobile terminals are increasingly becoming an integrated multimedia device with video, audio, music and mobile TV capabilities. IF303 is designed to offer rich multimedia experience video decoder with the award-winning CMMB demodulator, ofering the industry leading CMMB performance and stability.
Product Features
․ Intergrated hardware H.264 decoding and award-winning CMMB demodulator. ․ Support China Mobile Multimedia Broadcast (CMMB) Mobile TV standard. ․ Highly intergrated CMMB MDTV single-chip with U band tuner and SDRAM. ․ Superior signal sensitivity for both indoor and outdoor viewing. ․ Support multiple logic channel, picture-in-picture. ․ Fastest channel switching and channel scanning. ․ Highly stable viewing quality with minimum distortion to ensure high mobility. ․ Much reduced overall system design complexity and better system performance. ․ Complete CMMB solution with OS and applications.
Applications
․ Mobile Multimedia terminal. ․ Cellular phone, PDA. ․ PMP (Personal Multimedia Portable) ․ PND (Portable Navigation Device). ․ Laptop computer. ․ UMPC (Ultra Mobile Personal Computer). ․ MID (Mobile Internet Device).
ignored by settings
IF303 Has a 32-bits ARM926EJS processor as the core. The hardware video and audio decoders provide superior performance and low power consumption. Innofidei's proven CMMB demodulator implemented many innovative algorithm and proprietary RF design techniques to ensure good viewing quality under any condition.
I want to contact the staff of the Worldof Group China Innofidei product line
ã€Microchip-CAN Controller】
Product specification
‧Version Supported 2.0B Active ‧Tx Buffers 3 ‧Rx Buffers 2 ‧Masks 2 ‧Interrupt Output 1 ‧Filters 6 ‧Temp. Range (° C) -40 to +125 ‧Operating Voltage Range (V) 2.7 to 5.5
Product Features
‧18-pin package ‧Simple SPI interface to any MCU ‧One-shot mode ensures message transmission is attempted only once ‧Databyte filtering ‧Start-of-Frame (SOF) output ‧Low-power CMOS Technology
Applications
Gather the Car information from the ECU and display on Screen of the Car Entertraiment System or GPS navigator using CAN BUS.
ignored by settings
The MCP2515 is a second generation stand-alone CAN controller. It is pin and function compatible with the MCP2510 and also includes upgraded features like faster throughput, databyte filtering, and support for time-triggered protocols.
I want to contact the staff of Pinjia Group China Microchip product line
ã€Microchip-High SpeedCAN Transceiver】
Product specification
‧Masks 0 ‧Filters 0 ‧Temp. Range (° C) -40 to 125 ‧Operating Voltage Range (V) 4.5 to 5.5
Product Features
‧Slope control input ‧Supports 1 Mb / s operation ‧Implements ISO-11898 standard physical layer requirements ‧Suitable for 12V and 24V systems ‧Externally-controlled slope for reduced RFI emissions ‧Permanent dominant detect ‧Low current standby operation ‧High noise immunity due to differential bus implementation
Applications
Gather the Car information from the ECU and display on Screen of the Car Entertraiment System or GPS navigator using CAN BUS.
ignored by settings
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO- 11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb / s.
I want to contact the staff of Pinjia Group China Microchip product line
ã€Microchip-LIN Transceiver】
Product specification
Description LIN Transceiver with integrated Vreg Vreg Output Voltage Options (V) 3.3-5 Vreg Output Current (mA) 50 Max. Baud Rate (kBaud) 20 Vcc Range (V) 5.5 to 18
Product Features
‧Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602 ‧LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground ‧Wake Up through LIN Bus activity (filtered) or LWAKE pin ‧Thermal shutdown protection ‧Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V ‧Load dump protection up to 43V ‧RESET Output ‧MCP2022 available in 14-pin PDIP, SOIC and TSSOP packages -MCP2022-330 with 3.3V regulator -MCP2022-500 with 5V regulator ‧Extended temperature range: -40 ° C to + 125 ° C ‧Automotive Qualification
Applications
Gether the Car information using low costLIN BUS
ignored by settings
The MCP2022 provides a bidirectional, half-duplex communication physical interface to an automotive and industrial Local Interconnect (LIN) and SAE J2602 bus. Operation covers LIN Bus Specification Versions 1.3, 2.0, 2.1 and SAE J2602. The device incorporates a voltage regulator with 5V / 50mA or 3.3V / 50mA output. The regulator is short-circuit protected and also includes thermal shutdown. The regulator has been specifically designed to operate in the automotive environment and will survive reverse battery conditions, + 43V load dump transients and double-battery jump starts. The device has been designed to meet the stringent quiescent current requirements of the automotive industry. The devices' very low emissions, excellent robustness to automotive transients and very high ESD robustness have been confirmed by independent test authorities.
I want to contact the staff of Pinjia Group China Microchip product line
ã€Mstar-MST776-I-LF】
Product specification
Car TV Processor with PIP / POP
Product Features
‧Supports video input 480i, 480p, 576i, 576p, ‧720p, 1080i; RGB input resolution in 640x480, ‧800x480, 800x600 (SVGA), and 1024x768 (XGA)
Applications
Car TV and Portable DVD
ignored by settings
The MST776-I is a high quality ASIC for Car TV and portable DVD player applications. It receives analog NTSC / PAL / SECAM CVBS and S-Video inputs from TV tuners, DVD or VCR sources, including weak and distorted signals, as well as analog RGB input from GPS systems. Automatic gain control (AGC) and 10-bit 3-channel A / D converters provide high resolution video quantization. With automatic video source and mode detection. Multiple internal adaptive PLLs precisely extract pixel clock from video source and perform sharp color demodulation. PIP / POP is provided for multimedia applications. Built-in line-buffer supports adaptive 2-D comb-filter, 2-D sharpening, and synchronization stabler in a condensed manner. The output format of MST776-I supports 8-bit TTL or LVDS digital TFT-LCD modules.
I want to contact the staff of Pinjia Group China Mstar product line
[NEWPORT-NMI310 (DVB-T / H Dual Mode) / NMI305 (DVB-T)]
Product specification
․ NMI310: DVB-H / T RF Tuner + Demodulator SOC ․ NMI305: DVB-T RF Tuner + Demodulator SOC ․ 0.13um CMOS ․ VHF, UHF and L Band multi-band support ․ Ultra low power consumption: 20mW in DVB-H mode and 200mW in DVB-T mode ․ 8mm x 8mm BGA package ․ Support SPI, SDIO, TS, EBI and I2C Interfaces
Product Features
․ RF Tuner, Baseband Demodulator and Memory integrated on a single SOC die ․ Fully MBRAI Compliant ․ Supports DVB-T mode operation ․ No external memory required ․ Low Noise (3dB system NF) ․ High Linearity (+ 2dBm IP3) ․ 110Hz Doppler (16QAM, 8K, Rate ½)
Applications
․ Cellular Phone ․ PND ․ PMP / MP4 ․ Portable DVD Player ․ Portable TV ․ USB dongle ․ NB ․ DTV tuner module
ignored by settings
The NMI310 combines four bands, direct frequency reduction, DVB-H fundamental frequency demodulation, and required memory technology, and it has outstanding performance in sensitivity, channel switching, and interference suppression. The receiver can simultaneously receive 8 channels and maintain a low noise figure of 3.0dB (Noise Figure), so it can provide wide coverage. In addition, the design of low power consumption has reached 20dBm, and the system linearity can reach up to 10dB. Others include 55dB adjacent channel selectivity and higher Doppler performance in 8K mode. Because of the characteristics of the SoC and the need for external memory, Balun converters and other RF components, it can reduce material costs.
I want to contact the staff of the China Newport product line
[NEWPORT-NMI320 (ISDB-T 1 & 3 Seg)]
Product specification
․ ISDB-T 1 & 3 Segment Tuner + Demodulator SOC ․ Supports UHF and VHF operation ․ Power consumption below 72 mW ․ 7mm x 7mm BGA package ․ Support SPI, SDIO, TS, EBI and I2C Interfaces
Product Features
․ RF Tuner, Baseband Demodulator and Memory integrated on a single SOC die ․ Dual mode 1 segment and 3 segment operation ․ Very low noise figure: 3.0 dB typical ․ Up to + 25dBm IIP3 ․ -110dm Sensitivity (QPSK)
Applications
․ Cellular Phone ․ PND ․ PMP / MP4 ․ Portable DVD Player ․ Portable TV ․ USB dongle ․ NB ․ DTV tuner module
ignored by settings
The main features of NM320 are the dynamic gain range higher than 120dB, the image suppression of 50dB and the selectivity of adjacent channels greater than 55dB. Power consumption is 70mW, noise figure (Noise Figure) 3.0dB, and linearity (+ 20dBm IP3), and includes dual-band reception capability, ISDB-T One & Three Seg demodulation capability and all required memory, No external memory is required, Balun converter and loop filter. It enables customers to provide complete solutions with less BOM Cost.
I want to contact the staff of the China Newport product line
ã€NEWPORT-NMI500 (CMMB)】
Product specification
․ CMMB Mobile TV Tuner + Demodulator SOC ․ 65nm CMOS ․ VHF, UHF and S Band multi-band support ․ Ultra low power consumption: 10mW (assuming 10% duty cycle mode) and 100mW CW ․ 6mm x 6mm BGA package ․ Support SPI, SDIO, TS, EBI and I2C Interfaces
Product Features
․ RF Tuner, Baseband Demodulator and Memory integrated on a single SOC die ․ Integrated LNA with 2 dB NF ․ Sensitivity 101dBm ․ High Linearity (+ 5dBm IP3) ․ 110dB gain range ․ 60dB typical adjacent channel selectivity
Applications
․ Cellular Phone ․ PND ․ PMP / MP4 ․ Portable DVD Player ․ Portable TV ․ USB dongle ․ NB ․ DTV tuner module
ignored by settings
The NMI500 Sundance C mobile digital TV receiver integrates an RF tuner, demodulator and all required memory into a single monolithic CMOS device. “Newport Media's CMMB SOC will help transform the Mobile TV industry in China,†Key features of the NMI500 include the world's lowest power consumption and excellent RF performance including 120dB of variable gain, and greater than 55dB of adjacent channel selectivity. The SOC integrates UHF and S-band receiver, CMMB demodulator, plus all necessary memory. No other external memory, baluns or loop filters are required to create a complete solution with a very low bill of materials. The device is manufactured using low-cost, 65 nanometer complementary metal-oxide semiconductor (CMOS) process technology and is packaged in a fine pitch plastic ball grid array (FBGA).
I want to contact the staff of the China Newport product line
ã€NXP-GPS LNA-BGU7005】
Product specification
1.5 ~ 2.85V; 4.5mA
Product Features
‧Size: 1 x 1.45 x 0.5 mm ‧NF: 0.9dB ‧Gain: 16.5dB ‧P1dB: -11dBm ‧IIP3: 9dBm ‧Only two external components are needed: matching inductance, decoupling capacitor
Applications
GPS, PND, mobile phone, GPS module
ignored by settings
‧When GPS LNA: Only two external components are needed. ‧When the GPS module features are as follows: 1. Small area: 1x1.45x0.5 package 2. High degree of integration; only two external components are needed, suitable for general module and Sip package. ‧When the front-end module (SAW + GPS LNA + SAW) of the phone has the following features 1. Small total area: about 3x3 mm 2. Low current, save battery consumption 3. High linearity: 64dBm outband IIP3 4. The total number of components is small, reducing the burden of R & D design 5. Compared with the module containing the filter, the layout is more flexible 6. Built-in automatic bias voltage, non-GPS high power signal is not easy to saturate BGU7005 7. Low BOM cost QCOM RTR6285 is a commonly used receiver platform. The attached table compares the performance of BGU7005 FE and its reference design ALM1412.
I want to contact the NXP product line staff of the World Peace Group China I want to contact the NXP product line staff of the Pinjia Group China
ã€NXP-PNX9610】
Product specification
‧Dual Stream (HD & SD) Multi format Video Decoder (MPEG-2 / H.264 / VC-1) ‧Multi-format Audio Decoder ‧ARM1176 @ 600MHz Main System CPU ‧Advanced 2D Graphics Accelerator ‧Dual Output, Multi-Plane Video / Graphics Display Controller ‧DDR2 interface with Unified Memory Controller ‧Analog Video Output (TV Encoder) ‧Peripheral I / O Interfaces ‧Conditional Access System Support ‧Advanced Security
Product Features
‧Optimized compact size (1-DIN) ‧Motherboard offers: – Compact size – User interface based on OSD, Front Panel switches and ‧Infrared – One RJ45 Ethernet port – Two USB 2.0 ports – External HDD via SATA port – HDMI Output – S-Video Output – Composite Video and Left / Right Audio Output – S / PDIF Output ‧Motherboard supports – One RS232 header – JTAG header – Extension header: PCI and other I / O ‧Software – Supports Linux
Applications
‧In-Dash Entertainment ‧Rear Seat ‧TV & Video Box
ignored by settings
‧Dual Multi-format video decoding (HD + SD, separate IP) – Multi-format audio decoding (separate IP) – Eye-catching HMI supported by 2D GFX Accelerator – In car multi-media connectivity (ie 3xUSB, 2xEthernet, 2xS-ATA,…) – ARM11 application engine – High level of concurrency amongst use cases -Dual AV playback SoC with advanced ARM11, GFX Engine and rich Connectivity – Linux OS, Driver and BSP, WinCE and other OS ports feasible – MuViHD1 development reference board with demo applications – Radio subsystem development reference board including amplifiers and switch mode ‧Power supplies complementing in-dash entertainment system
