50M FM wireless headset transmitter part circuit



Figure 3 is a practical 50m FM wireless headset transmitter part of the circuit. The circuit is divided into oscillation and signal amplification. L1, C2-C5, V1 and other components are similar to the improved capacitor three-point oscillator of the black-and-white TV high-frequency head local oscillator circuit. It has good frequency stability and does not run for a long time. Practice has proved that this improvement is adopted in amateur situations Type capacitor three-point oscillator is fully competent. The author directly soldered the collector of V1 with an electric soldering iron for a few seconds. Under the condition that the temperature of the triode is very high, the normal radio reception is still normal, and there is no frequency running phenomenon. The frequency of the oscillator is mainly determined by L1 and C2. By fine-tuning L1, the range of 88-108MHZ can be covered. The audio signal is coupled to the base of V1 via R6 and C11, and the capacitance between the e and b poles of V1 changes the oscillation frequency with the change of the audio voltage to achieve frequency modulation. In this circuit, L, ~ L3 are wound flat with a single layer of 0.31mm enameled wire on the middle 3.5mm round bar. After adjusting L1 inter-turn spacing to fine-tune the oscillation frequency, and then fine-tuning the inter-turn spacing between L2 and L3 to oscillate the harmonic oscillator frequency, the maximum output power is obtained.

Fiber Hybrid Optic Adapter for FTTH Network manufactured by Foclink, provides reliable solution for fiber connections and meets the market requirement.  Hybrid Adapters include the FC, ST, SC, LC, MU, DIN SMA series. These hybrid fiber adapters are single mode and multimode types, with PC or APC zirconia sleeves, in simplex and duplex style. Hybrid Adapters are permitting an interconnection between Fiber Optic Connectors. The hybrid adapter's high-precision sleeve enables reliable ferrule mating of the SC and ST ferrule diameters, ensuring low insertion and return loss. The Fiber Hybrid Adapter is available with square or rectangular flange, and metal or polymer housing.

Fiber Hybrid Adapter

SC LC Adapter,SC To LC Adapter,Fiber SC To LC Adapter

Foclink Co., Ltd , https://www.scfiberpigtail.com