Detailed explanation of the expander and noise of the signal processing equipment of the mixer
1. The basic concept and principle of the expander is a special amplifier. It has an expansion threshold. For input signals smaller than this threshold, it is expanded by a certain expansion ratio. For input signals larger than this threshold, it is not expanded. 1: 1 output.
(1) Expansion ratio: dB number of dynamic change of the input signal of the expander / dB number of dynamic change of the output of the expander, for example: 1: 2, 1: 3, 1: 4, ... when the expansion ratio is 1: ∞ , The expander becomes a noise gate.
(2) Starting time of the expander (Attack
TIme): the time it takes for an input signal less than the expansion threshold to enter the expansion state to the specified expansion ratio.
(3) Recovery time of the expander (Release TIme): the time required for the input signal to return from the expanded state to the original non-expanded state.
The working principle of the expander is opposite to the compressor. It has a detector, called a gate threshold detector, which detects the input acoustic signal. If the detected input signal is higher than the threshold level, the voltage-controlled amplifier does not perform the input signal. The processing is carried out 1: 1. If the detected input signal is lower than the threshold level, the gain of the voltage-controlled amplifier is controlled. The control method depends on the gate threshold detector. The series impedance is transformed according to the set ratio to attenuate the input signal. Variety. Therefore, the detector actually attenuates signals below the threshold of the gate, and the speed of attenuation depends on the adjustment of the expansion ratio. Some machines engrave the expansion ratio as 2: 1, 3: 1, 4: 1, ...... This is the dynamic change dB number of the output signal / the dynamic change dB number of the input signal. This kind of representation makes it easy to see the proportion of the dynamic change of the output signal. Regardless of the method of presentation, it does not affect the operation and function of the machine.
2. Working characteristics of the expander The expander works according to the adjustment value of the expansion threshold (gate threshold), the expansion ratio, and the related start-up time and recovery time. The adjustment range of the gate threshold is usually from -60dB to + 20dB, and the expansion ratio is 1: 2, 1: 3, ..., 1: ∞.
It can be seen from the working characteristic curve of the expander that the expander works on two curves, namely the expansion section and the unit gain section. With the increase of the expansion ratio, the inflection point becomes more obvious, and the abruptness of the processed sound signal is more obvious The sound is more natural, and some expanders use the asymptotic method to clear the obvious inflection point. In addition, the shorter the startup time (ms) and recovery time, the more obvious the abruptness of sound signal processing. Therefore, under normal circumstances, the startup time and recovery time should be adjusted appropriately. The change process of the sound signal is usually from small to large, and the sound signal will become short. If the expansion ratio is adjusted to 1: ∞, the expander becomes a noise gate, and the noise below the gate threshold is attenuated sharply, up to 90dB.
3. The application of expander and noise gate (1) The side chain circuit of the expander can be used to create music with vibrato. The method is: amplify the 4Hz ～ 6Hz very low frequency signal and send it to the input terminal of the side chain circuit ), To control the expansion time of the expander, the music signal enters from the input terminal of the expander (input), and the vibrato music appears at the output terminal of the expander (Output).
(2) Use the microphone to pick up the drum rhythm and create rhythm music with drum sound. The drum signal picked up by the microphone is amplified, on the one hand, the expander is controlled, and on the one hand, the output signal is mixed with the output signal of the expander. When the drum sound appears, the drum sound signal controls the expander to work, the drum sound stops, the side chain circuit has no input, the music signal is not controlled by the expander, and the original music is output.
(3) Adjust the expansion ratio of the expander at 1: ∞ to become a noise gate. Any noise less than this threshold level is quickly attenuated, the expansion system is in a mute state, and music signals greater than this threshold are sent out in a 1: 1 manner Played the purpose of cutting off the system noise. Threshold adjustment actually determines the level of noise removal.
(4) The spreader can be used to eliminate the interference of two adjacent microphones, and the microphone sound below the threshold will be cut off.
(5) Use the noise gate to cut off the mechanical noise outside the music, for example: the noise of the plucking string, the pedal noise of the foot drum, etc.
Smart solar outdoor light with both lighting and RGB colorful lighting, can be charged with USB and solar panel. Once it has sunlight, the solar panel can be automatically charged , the charging way is very environmentally friendly. We added a USB charging way so that it can be quickly charged via the USB cable in cloudy day or rainy day.
The outdoor light is solar-sensing, it will automatically turns off when in the bright enviroment, then begin to charge by solar. When the night comes, it will automatically turn on in the dark. Waterproof IP65 makes users no need to worry when using in the rainy day.
Equipped with a detachable plastic sticker, it can be used to decorate the lawn, garden, beach... After removing the plastic sticker, it can be placed on the table as an ambient light. They will be stars fall into your garden, twinkle in the dark and go off in the day. Automatic cycle colorful mode makes parties begin at anytime and anywhere.
Our LED products can meet global quality standards and pass European testing by TUV Rheinland. Bulbs have certifications such as EMC, RED, LVD, ROHS, REACH, ERP and FCC.
The App are developed on the most advanced Bluetooth Mesh technology. [LinkupHome" App can be downloaded in the App store or Google Player, then you can control our product without any complicate steps. The App is stable, easy control and multifunctional.
The advantages of Bluetooth Mesh are fast connect, low power consumption, no password required and Ad-Hoc Network. No need WIFI and hubs, as long as you have a Bluetooth-enabled smart phone, you can experience the smart light. When you install several smart solar lamps, the self-organizing network function can make the signals free connect, break the limitation of distance.
Product Parameters
Description: Bluetooth Mesh RGB Outdoor Solar Lamp with APP
Bluetooth: CSR Bluetooth Mesh
Control Qty: 1-48pcs
Control distance: 20m
Product dimension: 155mm *235mm
Material: ABS+PC
Lamp Color: 8pcs RGB lamp beads+4pcs Warm White lamp beads
Lamp Current: 15-20mA
LED Power: 0.4W(15LM)
Battery Capacity: 3.7V, 1000mA Li-battery included
Charge Mode: Solar panel and a USB
Battery Using time: 9h(by USB charge for 1.5h) , 5h(by solar panel for whole sunny day)
Solar Panel: Monocrystalline silicon
Solar Panel Voltage: 6V
Solar Panel Output: 130mA
Waterproof Level: IP65
Warranty time: 1 Year
Certification: CE(EMC,RED) ROHS,IP65,FCC
Color box size: 22.2*20.6*5cm
G.W. of Unit: 0.55kg
N.W. of Unit: 0.34kg
Outdoor Lamp With APP,Smart Outdoor Lighting System,Phone Control Outdoor Lamp,APP Control Outdoor Lamp
Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com