Registered electrical engineer exam experience - Database & Sql Blog Articles

Test probe P100-M3

Test - lowercase jpg

Kaixin micro test

Registering an electrical exam is like a raging Qianjiang tide, pushing waves and waves to disturb the thinking of countless people. After a year and a few months of hard work, how many people remain calm at the moment when they actually get the exam papers. All engineers have gone through countless exams, but it is the first time to register for an electrical exam.
Someone was nervous in the examination room, some complained, and some laughed. Out of the examination room, some people are jealous, some are depressed, and some are chic. But in China, it is not surprising that the registered electrical exam is still underway.
Some people say that the exam questions are too biased.
According to the registration examination of the building, the experts who actually gave the question provided a question bank that was enough for 5-6 years. The questions are drawn out on a pro rata basis each year, and it is said that a repeat probability of 30% per year is allowed in the future. Therefore, the bias is not general.
Some people say that the test is obviously beneficial to the power system personnel.
China is implementing a registered electrical exam, not a registered building electrical exam, so it is normal for the power system exam questions to be more. I have said this many times on many occasions, to attract the attention of the building electrical community.
Some people say that the results of the case analysis questions in the afternoon of the next day are all text-choice questions, and the specifications and reference books can be found. How is the case study question like this? Everyone prepared short-circuit current calculation, relay protection calculation, lighting calculation, etc., which were not used.
This is worth thinking about.
1. Case analysis questions:
It consists of questions and small questions. One big question is two to five small questions, there are single-choice and multiple-choice questions, qualitative analysis and quantitative analysis; each sub-question has both logical and relative independence.
Examine the ability to comprehensively analyze and apply more complex professional knowledge, and apply professional knowledge to solve the accuracy and effectiveness of practical problems.
Single or multiple-choice questions can be words, numbers, and graphics, and can be used to test memory, comprehension, analysis, synthesis, and application.
1. Therefore, the proportion of text case analysis questions is quite normal.
2. The second day of the year, the afternoon case study exam is 50% optional, giving you a lot of value. Imagine that when the mandatory questions are implemented next year (the next morning), the qualitative analysis and quantitative analysis of the case analysis questions may become normal.
3. The expert did not fully meet the requirements for the case analysis problem. I can't comment, but some proposition experts have been away from engineering practice for many years, and some are scholars and professors. Is it suitable for engineering series propositions? Besides, the test propositions are unprecedented. They also touched the stones and crossed the river.
Therefore, comprehensive review should not be a problem, but more attention should be paid to the mastery and review of normative standards. Before the test, a Shenzhen comrade called me and asked if there were two days. How to review? I told him not to work hard on the topic, and to put a lot of rules into consideration for the exam. It should be right.
A candidate experience:
1, usually look at the norms to see one to two hours a day, more than one month before the exam, do reference books and online questions, the exam will be done quickly, will not push back, time is the exam precious.
2. My experience in registering for the exam is to read the exam book three times, then do the exercises, and then read the confusion of the exercises. There is still time for the exam. You can read the two exam books, do the exercises, and deepen your memory. I think you should pass the exam.
3, look at the norms and original textbooks, each section of the textbook is open, the examination is not difficult, the passage is inevitable.
4, review time 2 months, the test book to see twice, the exercises do it again, participated in the pre-test counseling class, but think that the pre-test counseling class is not a big role, mainly reading, and the norm to see again, mainly to be familiar with each Chapter content, familiar with the location of the chapters of the specification. In the end, you can view the general contents of each chapter.
5. I have passed the professional test for power supply and distribution. The above is my experience. In addition to the "Electrical Engineering Electrical Design Manual" (Electrical Engineering Manual), "Industrial and Civil Power Distribution Design Manual" (third edition), and the "Steel Enterprise Power Design Manual" is important, I just don't have The Iron and Steel Enterprise Power Design Manual, so the dragging aspect is not done well, but the "Steel Enterprise Power Design Manual" is not very good to buy.
6, test professional, short-circuit calculation can not be avoided, there are more related to it, if the short-circuit calculation will not, it is a bit difficult to pass the professional exam.
7. I passed the power supply and distribution test in 2006. I participated in a training in 2005. I have a certain understanding of the scope of the test. I only review the textbooks and specifications. I lost 2 points in the year and added one in 2006. Power Distribution Design Manual (Third Edition), I think the key point is to thoroughly understand the specifications, whether it is textbooks or manuals, the main content is inseparable from the norms. Stick to one hour a day from time to time.
B candidates experience:
1) Analysis of professional examination content 1 proportion - concept title 200 points (first day), accounting for 67% of the total score, must answer; (120 points pass)
2 case questions 100 points (the second day), accounting for 33% of the total score, of which 50% are optional questions. (60 points pass)
Review exam skills:
1. Read the review book as required by the outline and consult the relevant specifications. To understand the concept, you don't have to think too much.
2, typical cases and calculations must be mastered.
3, make full use of the optional questions (there are some optional questions in the case title, the score is scored in the top 25 answers in the order), so review the knowledge should be as relaxed as possible. Sometimes the power engineering problem is very simple, it is better to do the power engineering problem.
4, the question type requirements must be clearly seen. There have been many lessons in the exams.
2) Focus on professional exam review · Master national policy:
1) Safety and energy conservation and harmonic control and environmental protection in the outlines of 3 and 4 are hot topics in recent years. Safety also includes grounding safety; energy saving also includes lighting energy savings.
2) Relevant contents of the mandatory provisions of the national regulations.
· Master the key issues of electrical engineering:
1) Issues related to power distribution systems;
2) Location selection, selection problems, such as the location of the substation, electrical equipment, cable selection, etc.;
3) Design of relay protection and automatic devices;
· Master the calculation questions:
1) load calculation;
2) short circuit current calculation;
3) Relay protection setting calculation;
4) Lightning protection design calculation;
5) Illumination calculation;
6) Calculation of motor starting, braking and protection configuration.
·Typical case exercises:
1) Energy efficiency measures - such as reactive power compensation;
2) Load grading - load calculation - workshop change selection;
3) Main wiring design of power supply and distribution system;
4) Substation graphic design and other types of work conditions;
5) Selection of electrical equipment, including high-voltage and low-voltage equipment;
6) Dynamic stability and thermal stability check of the wire;
7) Short-circuit current calculation - relay protection calculation - control wiring design;
8) Cases related to lightning protection of buildings, such as determination of lightning protection level, selection of lightning protection measures, and verification of protection scope;
9) Lighting design, such as illumination calculation, lamp selection, plane layout and light source determination;
10) Low-voltage motor control appliance selection;
11) Plc working principle analysis or simple programming;
12) Fire system design, including alarm system determination, detector selection, linkage control measures, etc.;
13) Total equipotential bonding and auxiliary equipotential measures;
14) Integrated wiring design.
note:
1. Answer the questions as required to prevent invalidation. (Example: invalid with pencil)
2. The answer position should be correct. (For example: check the number, do not add ABCD to the brackets, it is invalid)
3. If you have a choice, you must not do more.
4. The test questions are only right or wrong, and there is no half-point.
5. Cannot write words that are not related to the answer (preventing invalid).
I hope the above content can give some help to the test friends.
C candidate's exam summary (professional knowledge scored 153 points, case scored 84 points)
Registering an electrical engineer exam is a very difficult exam that the majority of designers have to pass. The main features are:
1. The content of the exam covers a wide range, spanning multiple professional fields, and is the most experienced technical staff. Generally, one-third of the content is not involved, and some even one-half to three. The second is not involved in the work, so it is relatively difficult.
2, the content is very much, only the test reference books, specifications and books related to the test all add up to a few feet high, so that the focus can not be prominent, no way to start. The amount of questions in the exam is also very large, and most people cannot complete all the questions normally.
3, the test time is relatively long, three hours each afternoon and afternoon, concentrate on the examination of the essence of the body, the consumption of the body is very large, only with good physical quality, can energetically respond to this high-intensity test. The exam found that many candidates often stunned after the test, and the general test is good. The latter is often worse. First, the case is relatively difficult. Second, the physical quality has been consumed too much after the previous day’s torture. The physical condition of the next day was obviously not as good as the first day, so the phenomenon of dizziness often appeared.
For the above points. I summarize the following experience based on the process of my own exam. How to review
1. Take the examination syllabus as the core, focus on the guidance book and specifications, and use the manual as an auxiliary material.
2, the contents of the instructions and specifications must be very familiar, not required to be very proficient (too much content, very difficult to do), but must know the key knowledge points, understand the important knowledge required in the outline to master and require familiarity.
3, the book does not have to look every day, you can watch for a period of time, stop for a period of time (referring to people who are prepared for a long time), so that it is very good to precipitate, it is difficult to clear the mind every day, but it is easy to brain confusion, not allowed for the exam Play effectively.
4, because it is an open book exam, so for familiar chapters, familiar areas can spend less time (often some people like to study in areas they are familiar with, wasting too much time), focusing on those who have not used peace before Contacted chapters and specifications. This is not as close to "partial". When you take the exam, you won't encounter a problem that makes you dumbfounded.
Second, how to save time, in order to fully complete all the questions
1. There are a lot of duplicates in different specifications (there are a few repetitions in the guidebook). For example, there are fire prevention in high-level regulations, fire prevention in fire alarms, fire prevention in civil regulations, and, as in various specifications. There are grades that stress the load. In order to save time, you should mark the duplicates in the specification as a page mark. For example, in the high-level fire prevention section, the other specifications are also described as the number of pages in the fire prevention section. If you do not find it here, you will immediately turn it. Go to other places to check and save a lot of test time (the same is true for the guide).
2. While familiar with the contents of the book, try to familiarize yourself with the catalogue of the book, make sure to know each chapter of each chapter, what is the main content of each specification, including what knowledge points, after familiarizing with these, you can see it in the examination room. The question is to know which book to turn over and to check which specification.
Third, how to maintain a full physical examination process is also a difficult process. Without good physical quality, it is difficult to play to its true level. Therefore, it is necessary to maintain sufficient physical strength during the examination.
1. It is very important not to give up your original fitness plan because you need to read the book during the test.
2. Be sure to eat well during the test, eat enough, and have enough sleep.
3. Bring two bottles of Red Bull every day during the exam, drink one bottle before each exam (there is a suspicion of advertising for Red Bull), and bring some high-energy foods, such as beef jerky, and add it when needed. Most exams can only be eaten at noon, and they can't eat well. They can help improve their physical strength and maintain ample energy to cope with the exam.
The above glimpse is the summary of my participation in the electricity test, I hope to play a role in the peers, if there is something wrong with the time, I did not talk, you did not see! If you have any other questions, please feel free to contact us!
D candidates' basic exam experience:
The examination syllabus has come down, the basic course test can be more, the morning test is based on general, there are high numbers, general things, generalization and so on.
In the afternoon, the professional foundation is tested, with circuits, electromagnetic fields, motors, electricity, mode power, and electricity.
First, the total review time should be reserved before the test. According to the test subjects you participated in, the content to be reviewed is determined. Generally should not be less than 15 days. For example, I have to participate in the "Power Supply and Distribution" professional exam last year, a total of 18 chapters, 58 specifications, a problem set need to review. I reserved 15 days as the total review time. (Please note that before the general review, you should have reviewed the content of the review materials at least comprehensively. If you haven't reviewed it yet, please read it as soon as possible.)
1, 1~5 days: According to the main points of the chapters reviewed in the previous review, combined with the contents of the review materials and the contents of the problem sets, the contents of each chapter will be deepened by browsing, and more attention can be paid to the problem sets. Calculate the method and mark the number of pages of the answer to the question. In these few days, we will focus on deepening the impressions of the contents of each chapter in memory. The key points are to know where to find answers in the review materials and problem sets.
2, 6 ~ 12: Focus on reviewing "n this specification", for the specification, each page, every page must be seen (but not all need to remember), the main points of possible tests (may be common sense in design) It may also be a "strong bar" or a small word under the various tables. It should be marked on the book to improve the speed of the search. Everyone must pay attention to the fact that there is a specification for "Article Description", and we must look at the "Article Description". It is best to mark the part of the formula.
3, 13 ~ 14: "Hold" norms, review materials, problem sets, I feel where I am unfamiliar. Mainly to relax the mood.
4, 15: All the items needed for the exam in the morning, go to the examination room in the afternoon, and must sleep a little earlier than usual in the evening. During the day, you can browse through the key points of your summary.
5, the usual work schedule should pay attention to: 1 ~ 12, if you are energetic at night, you can review more time, you can sleep a little more the next day. From 13 to 15 days, the schedule of work and rest should be adjusted according to the examination time. Get up, review in the morning, rest at noon, and review in the afternoon should be conducted according to the test day to adjust to the exam.
Second, the practice of marking:
1. You can buy some stickers, paste them at the required pages (for standard bindings, at least at the separation of the specifications), and write the identification.
2, in the focus of each page of the standard, use the watercolor brush to draw out the key content, easy to open the page when the exam, you can know the focus of this page at a glance.
Third, the item preparation:
1. Specification: You usually review the specifications of the mark. Of course, the best book with the "Article Description" is the best.
2. Information: All kinds of review materials and problem sets that are officially issued can be used. Please note that it should be less and more refined, not too much. I only took the official review materials, one of the problem sets, and a "design manual".
3, a scientific calculator, do not have a calculator with a chronograph function, so as not to be collected during the exam.
4. Two signature pens, two 2B pencils, one pencil sharpener and one watch.
5, backpacks with information, suitable size.
Fourth, the exam
1. Be sure to look at the main points of the data before the exam to warm up the brain.
2, the first day of professional foundation, mainly the mastery of each knowledge point, calculation questions are few. The answers to each question can be found in the norm, so saying that "norm is the life of design" is also the focus of the exam. Don't let go of any questions, guess if you don't understand, choose an answer, maybe it's right.
3. The second day of professional synthesis, mainly to explore the comprehensive application of professional knowledge. The morning questions need to be done all. Please note that you should not waste too much time on a topic. If you don't do it, you will give up. If you do, you will need to do too much time to stay at the end. In the afternoon, you can select some of the questions to be done according to the requirements (now the exam requirements are all done). It is best to choose the easiest to do first, and then choose the harder ones.
4, the second day of the exam, each question must be written according to the requirements of the answer process or answer basis. The answer process should be concise and clear. Answer the basis of the question, you should first write the corresponding specification entry, and then briefly explain. If there is a "description", the content of the "Article Description" may be written in lieu of the explanation.
Five, diet
1. In the morning of the test, you should eat some high-protein foods, such as eggs, soy milk, milk, chocolate, etc., but you should not eat too much, prevent blood in the stomach, and the brain does not supply enough blood during the test. Difficult, bad mood, can eat beef jerky, nuts food.
2, eat dry rice at noon, dishes can be spicy, can lift the spirit. You can also eat one or two VCs. It is best to sleep for 30 to 60 minutes at noon. Be careful not to drink too much water. It is very troublesome to go to the bathroom during the exam.
3, must go to the bathroom before the exam, easy to play.
E candidates' test summary The professional examinations are mainly divided into selections and cases. The content of the examinations is the same. The difference is that the selected test sites are mainly standardized articles, mainly to examine the knowledge points; the cases are mainly in the manuals and the appendices of the specifications. Inside, to investigate the selection, parameters and other calculations.
In the actual review process, because I usually don't have a lot of points, I have never seen a lot of content, mainly relying on the two-month assault review.
I use my review process as an exam experience and hope to help you register for the exam.
I have read the guidebook in the first year, but due to the limitation of the test period, the registration is not reported, so in the first year of June, the test content is no longer involved. At the same time, because I am not designing in the design institute, I usually do it. Nor can you touch the relevant norms and books.
In the second year of July, I will start reviewing after I took the name. I will read the guidebook for about one month. In the meantime, I have done a very tedious thing. I want to put the contents of the review guide as much as possible in the specification and manual. Find it and mark it separately. In this way, the review guide is easy to remember, and then check in the specification to see which guides are there and which are not. In fact, there are not many things, and there are many things that have the same or similar provisions in different specifications. Most of the same articles are completely consistent. However, the manual is more troublesome. The content of the manual is too much. It is impossible to read it all at once. You can turn the catalogue up and look at the approximate content, mainly because it must be read in the guide. After this kind of combing, the content of the exam is very clear, and it should be more effective than simply reading the book over and over again. By reading the review guide, you can know almost 70% of the exam content. This is very important. When you choose the exam, especially for those who do not actually do electrical design work, it will be a good turn. I started to do the problem sets in August. They are all a set of designated textbooks. The problem sets are probably in early September, and then the exercises are sorted out. Finally, the focus of the book is doubled when I watched the first two times. The choices that are not in the guide but are in the specification are seen one or two times. The choice is basically the same. As for the case, as long as the manual can be found, and all the questions after the problem set are found corresponding to the manual and the normative formula, basically there is no problem.
Some notes:
(1) Don't just look at the instruction book, because when the answer is answered, especially the case, the reference guide is invalid. Only the specifications and manuals in the reference are valid. The guide book is to be seen. The guidebook has a very good idea and it is very convenient to organize the memory. However, it must be remembered that the guide book is only a reference in our review. The key is to find the original words in the specification and manual. But it is also best to look at the guidebook, otherwise it is not easy to form a clear knowledge point composition, will form many blind spots in the review, and blind spots are often things that test experts like to test.
(2) The manual must be complete, especially the steel manual and the third edition of the aviation manual. It is not easy to find, but many schools have libraries that can be used to borrow some students. The steel manual is really not found. The number of pages in the manual must be marked on the book when the relevant questions are done. Because the books that people can't find, the test is usually very simple, and many of the steel manuals. The content is very important and has a strong practical significance.
(3) The new norm must be focused on, and the latest norms issued before the exam in the previous year are the focus of the exam. I have suffered a big loss from this point. Since my materials are all in the library, there is no "Electrical Design Code for Civil Buildings" in 2008. I have learned from the professional examinations in 2009 that the contents of the "Electrical Design Code for Civil Buildings" in 2008 may not be selected. 20 points, and I don't have these, so I chose not to test the questions.
(4) Regarding the problem of practice, in fact, the practice is only to consolidate the book that I read. I have not done any real questions. Of course, I can find the best one, knowing myself and knowing each other. I have read some online one-day questions, very few, mainly the problem set, it is recommended not to do all the chapters, it is best to do it in a few rounds, one round and one less, such as the first round of questions For multiples of 2, the second round of the title is 1, 5, 9, and the last round of the third question is 3, 7, so you can find the status, you can also keep yourself familiar with the chapters, not to It takes too long to forget and forget too much. For a lot of content examined in the topic, it is important to look at it, such as the division of power supply levels. There are about 4 or 5 different versions in the specification and manual, which involve different classification methods, as well as the classification of new and old, etc. You should find the relevant content in the latest information as a standard answer.
Finally, there will be a lot of references in the questions that I can't find. I just ignore them. There is no need to entangle them on these issues. Experts from other countries can't find them. We won't join in the fun. Some of the more error-prone questions, or some of the typical mistakes that occur in the process of doing it yourself, must be marked to facilitate review in the last two weeks.
Practice is the key to the test case. Basically, the case on the problem set is basically no problem. It is very good when doing the case.
Personal feelings, the basic choice of the original exercise is not acceptable, but it is very important to keep the practice to maintain the familiarity with the test content. After all, the content of the professional test is really a lot.
(5) Physical fitness must be well stocked. The exam is very tired. The registration of the professional is also a physical activity. Turn over a pile of books over 10 kilograms. Generally, the exam is finished and the body is almost collapsed. Therefore, we must have a good energy. It is best to find a place to rest at noon, at least not to walk around, or to sleep in the afternoon, probably the slow-moving turtle will die. Don't disturb your life rhythm, it will be counterproductive. Everyone is a long time tester. Generally, they will know what kind of rhythm they are suitable for. They just don't take exams for many years, they may be unaccustomed to it, and they are in the same state of business trips and working overtime. That's it.
The above is a little bit of my registration exam. Many of the content has been quite long since the time passed. It is not very specific to remember. If you still have anything to know, you can continue to communicate and you can make some more conclusions. Finally, I wish everyone all passed the registration exam earlier.
F candidates' experience:
1. Read the review book as required by the outline and consult the relevant specifications. To understand the concept, you don't have to think too much.
2, typical cases and calculations must be mastered.
3, make full use of the optional question opportunities (the afternoon of the next day), so review the knowledge surface as much as possible. Sometimes the power engineering problem is very simple, it is better to do the power engineering problem more cost-effective.
4, the question type requirements must be clearly seen. There have been many lessons in the exams.
First, the focus of professional exam review
1. Master the national policy:
1) Safety, energy saving and harmonic control in 3 and 4 of the syllabus are hot topics in recent years. Safety also includes grounding safety; energy saving also includes lighting energy savings.
2) The mandatory provisions of the national regulations.
2. Master the key issues of electrical engineering:
1) Issues related to power distribution systems;
2) Location selection, selection problems, such as the location of the substation, electrical equipment, cable selection, etc.;
3) Design of relay protection and automatic devices;
3. Master the relevant calculation questions:
1) load calculation;
2) short circuit current calculation;
3) Relay protection setting calculation;
4) Lightning protection design calculation;
5) Illumination calculation;
6) Calculation of motor starting, braking and protection configuration.
4. Typical case exercises:
1) Energy efficiency measures - such as reactive power compensation;
2) Load grading - load calculation - workshop change selection;
3) Main wiring design of power supply and distribution system;
4) Substation graphic design and other types of work conditions;
5) Selection of electrical equipment, including high-voltage and low-voltage equipment;
6) Dynamic stability and thermal stability check of the wire;
7) Short-circuit current calculation - relay protection calculation - control wiring design;
8) Cases related to lightning protection of buildings, such as determination of lightning protection level, selection of lightning protection measures, and verification of protection scope;
9) Lighting design, such as illumination calculation, lamp selection, plane layout and light source determination;
10) Low-voltage motor control appliance selection;
11) PLC working principle analysis or simple programming;
12) Fire system design, including alarm system determination, detector selection, linkage control measures, etc.;
13) Total equipotential bonding and auxiliary equipotential measures;
14) Integrated wiring design;
Second, matters needing attention
1. Answer the questions as required to prevent invalidation. (Example: invalid with pencil)
2. The answer position should be correct. (For example, if you check the number without adding A, B, C, D to the brackets, it will be invalid)
3. If you have a choice, you must not do more.
4. The test questions are only right or wrong, and there is no half-point.
5. Cannot write words that are not related to the answer (preventing invalid).

When I reviewed, I followed the real question and understood a question. The manuals are basically not specifically read, and they are all familiar in the process of doing the exercises. On each question, the questions are based on the source and are easy to find. It may be understood that the things that can't be read by the book can be understood in the actual project. I also understand the true meaning of each pen on the drawing. This feeling is very good, and it also strengthens my determination to test. The purpose of the test is not that one. Proof, but a good attitude towards learning and work.
I want to emphasize that the registration of electrical professional examinations is not to "see" the past, but to "do" the past, relying on "testing" rather than relying on "strength." Because this exam is completely in need of exams, the effect of reading and reading is not good, so we must do the topic and do the real questions over the years. It is very difficult to find the real problem. I have not seen any formal publications. I am trying to find out a little bit. , you must master the test. To sum it up is: do the real problem + check the specification and manual. Note: I put the "make the real problem" at the forefront. Many people review the wrong methods. They hold the thick specifications and manuals. I don't know where the key points are. I will go to the exam when I see half of it. I am confused. Going to the examination room, it is impossible to pass. The best way is to get the real questions of the power supply and distribution profession over the years, and do one of the questions, so that in fact, the annual questions are similar, the focus of the test is similar, so that the manual and the specification are selective. Note: Specifications and manuals are not used to "see" and are used to "check"! If you really see which manual or specification knowledge point, you can go through the corresponding manual or specification, which is very efficient and more effective. Because the characteristics of the registered electrical professional exam (including the basic exam) is that the repetition rate of the real question is very high, and the annual focus is similar, even the same topic is quite a lot.

All the questions in the professional knowledge exam are basically as long as you know which specification or manual from the question, and when you turn there, the answer comes out. Because the questions and options are the original texts in the specification or manual, basically the word is not changed. However, a total of 59 specifications, according to my review and the summary of the many years of exam questions, of which 22 are more test, so you can specialize in these 22 specifications.
22 specifications to focus on:
1. "The effect of current passing through the human body" GBT13870.1-1992;
2. "Building Electrical Installations" GB16895.3-2004;
3. "3kV-110kV high voltage power distribution device" GB50060-2008;
4. "Code for Design of Power Engineering Cables" GB50217-2007;
5. "Code for Design of Electrical Installations for Explosive and Fire Hazardous Environments" GB50058-1992;
6. "Design Specification for Low Voltage Distribution" GB50054-1995;
7. "Code for lightning protection design of buildings" GB50057-1994 (2000 edition);
8. "Overvoltage protection and insulation coordination of AC electrical equipment" DLT620-1997;
9. "Grounding of AC Electrical Equipment" DLT621-1997;
10. "Architectural Lighting Design Standards" GB50034-2004;
11. "Technical Regulations for Design of Conductors and Electrical Appliances" DL5222-2005;
12. "Design Specification for Low Voltage Distribution" GB50054-1995;
13. “Design Specification for Substation of 10kV and Below” GB50053-1994;
14. "Design Specification for Power Supply and Distribution System" GB50052-1995;
15. "Design Specification for Relay Protection and Automatic Device of Electric Power Equipment" GB50062-2008;
16. "Technical Regulations for DC System Design of Power Engineering" DLT5044-2004;
17. "Code for Design of Automatic Fire Alarm System" GB50116-1998;
18. "Design Specification for Overhead Power Lines of 66kV and Below" GB50061-1997;
19. "Design Specification for Shunt Capacitor Device" GB50227-2008;
20. "Design Specification for 35-110kV Substation" GB50059-1992;
21. "Code for Electrical Design of Civil Buildings" JGJ16-2008;
22, "Design specifications for overhead power lines of 66kV and below" GB50061-1997;
As for the specific inspection clauses of each specification, it is basically fixed. For example, the Code for Lightning Protection of Buildings GB50057-1994 (2000 edition) is generally the inspection of Article 2.0.3 Division of the first and second types of lightning protection buildings. . This look at the real questions over the years can basically be known.
The specifications of the 22 key investigations that have been summed up must be carefully examined. At least the problem should be seen from which position of the specification, so that the examination can be quickly turned over and save time.
In addition, much of the first day of professional knowledge comes from the "Steel Enterprise Power Design Manual" and "Industrial and Civil Power Distribution Design Manual", but it does not need to be all seen, it is important.
Case exam review experience:
The next day is the case question, 25 must-answer questions in the morning, and 25 questions in the afternoon (there are generally 40 questions in the afternoon, and 25 of them are selected). The full score is 100 points, combined scores in the afternoon and afternoon, 60 points passed.
The second day's professional case questions are mainly from "Code for Electrical Design of Civil Buildings" (JGJ16-2008), "Electric Design Manual for Steel Enterprises", "Design Specification for Substations of 10kV and Below" (GB50053-1994) and "Industrial and Civil Use" Power Distribution Design Manual, etc. When I reviewed, I followed the real question and understood a question. The manuals are basically not specifically read, and they are all familiar in the process of doing the exercises. On each question, the questions are based on the source and are easy to find. It may be understood that the things that can't be read by the book can be understood in the actual project. I also understand the true meaning of each pen on the drawing. This feeling is very good, and it also strengthens my determination to test. The purpose of the test is not that one. Proof, but a good attitude towards learning and work.

G candidates experience - the old guy who is over 58 years old, who contributed to the stupid experience of the Cultural Revolution, has a poor foundation. Although he has been engaged in the electrical industry for a lifetime, he is not specifically designed. The content covered in the fifteenth chapter of the outline, the knowledge in some areas is unfamiliar. For example, the electric drive is divided into DC drive and AC drive; it is not the person who works in the power sector. It is impossible to actually touch the high voltage and large system; the person who is dry and strong cannot be in the field of weak electricity, computer control, communication, network, TV broadcast. All are so proficient. How to do it? Only comprehensively read more books, do more exercises, focus on tackling, and compulsory memory over and over again.
I have been in the test for four consecutive years, and I have been pitted for two years by a professional case with two points difference. I have been immersed in professional knowledge for two years by three to five points. The pain in the matter does not have to be said. I am only fighting for honor at this age. Young colleagues will not be as stupid as I am!
After four years, I took the exam for the first time in 2007, and worked hard for three months. At that time, the information on hand was very scarce and ignorant. The second year was a foundation, but it was not in the heat; the third year was The knowledge required by the syllabus should be more comprehensive, and the fire is coming, but... The fourth year summed up, why did you suffer from the multiple-choice questions? Or the information on hand is incomplete, and the specification assembly has been bought a whole set. From the first half of the year, the specification has been turned page by page. The professional case knowledge has been consolidated once more than two months before the test.
Therefore, I want to say to my young friends that your basic knowledge is solid, and even if you are lucky in professional examinations, you will be able to pass the work for at least two to three years.
Finally talk about the day of the test. First of all, everyone must prepare a strong suitcase. The manual specification must be fully searched, mark the articles that they think are important, and mark the number of important articles in the text for easy searching. Mark the relevant places in the manual for the calculation, and fold the folds.
It is very important for time allocation. It is necessary to determine what level of time you will be before the exam, and resolutely avoid the tragedy caused by insufficient time. Because it is the first time to take the exam, I am the second morning because the time is too expensive. More than 3 questions have not been done, in fact, these 3 questions will be ... must give yourself time to paint.