Many friends told me that they couldn't adjust their tone when they smashed the sound, and they felt very distressed. The effect was changed and changed, but the effect was always unsatisfactory. I think that for many people, there may be similar feelings, then I will write a little shallow experience to share with you.
First, when you break the sound, you need to figure out what kind of broken sound you want to adjust. For example, it is a light break or a broken sound. The tube is very thick and solid, or the kind of crushing. After this is determined, start working again.
Second, if you have the conditions, it is best to find a reference, which means that it is better to have a better sound-breaking tone as a template. You can listen to the sounds in the songs you like, and listen to them over and over again so that you can grasp the basis of their sounds. But you know, the sounds in the CDs of many band studios are high-quality recordings and mixed sounds, not the original sounds, so I suggest that you better find the sound of live performances, so that Misguided.
Third, make full use of the effects equipment in your hand. Everyone's preferences are different. Everyone's equipment is definitely different, so there are different ways for different people. I will briefly talk about it below.
Many people like to use a single effect, yes, a single effect can bring out a good sound, but if you have a better guitar speaker it would be perfect. why? In fact, many guitarists in foreign countries have their broken sounds more by the sound of the sound, so a good speaker is essential for you. If you have a good tube speaker, then you can use its broken sound to be your original broken sound source. If you like heavy metal music, you can adjust the sound of the sound to the nearest quarter, which sounds very thick and heavy, and then use the speaker balance to adjust the sound. For example, the adjustment of the Marshall speaker is to break the sound and the balanced high and low sounds to the maximum, the Contour (contour, the chrome of the tone) is also opened to the maximum, and the midrange is opened to the minimum. This sound sounds full of power, such as the sound of a cutting machine, rich in high and low frequency, is the so-called Hi-Gain break. Many Thrash Metal bands often use such sounds, such as Metallica, Pantera, etc., but Megadeth's voice breaks relatively weaker, and the intermediate frequency is higher, the sound will sound more solid and full.
Light break or weak break can be done with the overdrive overload on the speaker. Turn the overload on and use the natural overload of the tube. This kind of sound is very useful for friends who like Blues, Poprock, and the kind of crisp and light broken sounds in many foreign bands are made in this way. When playing Blues, the intermediate frequency and high frequency of the light-breaking equalization are larger, which sounds more of the effects of the sixties and seventies. The balanced low frequency and high frequency of the Poprock sound are larger, so the sound is more tough.
Some people may ask: Isn't it a waste of the broken sound in my hand? No waste, we can use it to do Solo sounds. Many people seem to think that the greater the break, the better the Solo tone, unless someone deliberately wants that weak effect. The increase in breaks allows us to easily achieve a long sustain (Sustain), the greater the break, the longer the sustain, and the easier it is to play.
Breaking the sound is very influential on the change of the sound, and the effect on the sound of the Solo is not as great as the effect on the rhythm sound. Therefore, we use the broken sound in the hand to adjust the broken sound of the broken sound to the minimum and the tone to the maximum. When you talk about the rhythm, the single is closed. When you need the solo, you will step on it. You will find that the broken sound seems to be big, and the bounce is less sensitive to the change of the pickup strength, and the sound is more transparent. It’s empty. This is because we added this single to make the signal input to the speaker enhanced. Many masters use it. For example, Nuno uses Pro-co rat's Overdrive and Hughs&katerner speakers; Yngwie uses Dod's Overdrive and Marshall speakers; Steve Vai uses Boss' Ds-1 and Bogner speakers. Sound and so on.
If we use a broken metal single piece of heavy metal, you can break the sound without the speaker. It's good to use a single heavy metal tone. For example, the Boss Mt-2 has an adjustment of the high and medium bass, and the Midseq is basically similar to the chrome of the tone. It can make a squeaky and grainy tone, and there are many tuning methods on the manual. I will not describe them one by one. However, it is worth mentioning that if you feel that somewhere on the effect is still not satisfactory, then adjust the balance on the speaker. Generally speaking, the balance on the sound is in the middle. Then, the Solo part can be used to compress the signal for amplification. The compression of Boss, Dod and Mxr is great. Note that the amount of compression is not too large. The compression ratio is generally between 2:1 and 4:1. It is. And if you don't play Solo, it's best not to open the compression or the signal to enhance the break, because the strength of the pick when playing the piano is not obvious, it is not good for the player to control the light weight and emotional changes.
There are still a lot of people using synthetic effects, in fact, this is the easiest way, because the synthetic effect of the compression, break, balance, etc., is very convenient. But some cheap products may have unreal sounds, but there is no way. Take Boss' Gt-6 for example. Gt-6 is a very cost-effective product that combines all of BOSS's most classic and popular guitar effects and the latest guitar effects, like OD-1, DS. -1, MT-2, CH-1, DD-3, etc. It can be said that having a GT-6 is equivalent to having all the guitar single effects of BOSS. In this way, we can easily choose to use the effect to make the sound, the method is the same as the one I said above is to use the sound of a single sound, but it depends on your own å¼é„‹è–‹å ¶æ‚¼J Fine adjustment, next time I have the opportunity to tell you about the parameters of Gt-6 and how to make sounds.
Fourth, adjust the guitar in your hand well. If you always feel broken or the volume is too small and the sound is very soft, then you can adjust the pickup on the piano upwards, as long as it does not hinder the playing of the piano, so the pickup must v will increase a bit, and it will be more sensitive and comfortable to play. Also, changing the new strings is also a good way to improve the sound. The sound of the new string is crisper, so the sound of the broken sound will be better, it sounds bigger than the original.
Fifth, the noise problem. This problem is a lot of headaches. In fact, the sound is strictly speaking noise. There is no way. There is definitely noise in the broken sound. It is a good way to reduce the noise by properly reducing the volume. I don't advocate opening a noise door or a noise reduction switch, because your tone will become very stiff, especially if the tail of the tone will be as ugly as being cut off. How big is the broken volume? Different music has different needs. We can't generalize it. Let's take a heavy metal tone. I think you are standing 1 to 2 meters in front of the speaker (about 100 watts of a large speaker), and the back of the speaker is screwed open. The volume then releases both hands. If the whistling sound of natural feedback is gradually generated, it means that the sound-breaking degree is more appropriate. If it is called immediately, the sound-breaking degree is large. If there is no sound, the sound-breaking degree can be appropriately increased. I will not give you an example of other music, just remember that the bigger the better, the smaller the better, and the best for your own music.
There are still many places to explore about the topic of breaking sound. I think that as long as everyone can try more and use more, everyone can make their own satisfied sounds. I just write about my own experience. To the role of bricks to attract jade, I hope that my friends will be satisfied with a little help.
A Category 5e Ethernet data cable is also referred to as a Cat 5e Network Cable, Cat5e cable, Cat5e Ethernet Cable, or Cat 5e data/Lan Cable. Meets or exceeds Category 5e performance in compliance with the TIA/EIA 568-B standard and backwards compatible with Cat5 cable network.
High Performance Internet cable is Cat5e rated; The Ethernet cord with 24 AWG copper wire provides universal connectivity for LAN network components such as PCs, computer servers, printers, routers, switch boxes, network media players, NAS, VoIP phones, PoE devices, and more.
Product Information:
1. Frequency - 100 MHz
2. Transmission Speed - 1000BASE-TX
3. Available Length - 0.5M~30M or Longer
4. Connectors - RJ45 Plug unshielded
5. Condcutor- 24AWG or 26AWG or 28AWG (America wire gague)
6. Cable Construction - unshielded
7. Jacket- PVC or LSZH
8. Install - Used indoor, in-wall and in the ceiling
Applications: HP Server, Router switch Lan firewall Modern, Computer mac IP phones TV, Gaming system PS4 PS3 xbox 360 lan network networks networking switch TV ADSL computer laptop PS3 PS4 Xbox360 gaming system.
Cat5E Cable,Cat5E Patch Cable,Patch Cable Cat5E,Cat5E Rj45 Shielded Ethernet Cable
Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com