The previous Epson EP-807 printer was really good. However, the front-line handcuffs ..... The result will be another one. Well, long ago I wanted to buy the A3 machine, and it was just another shot.
The EPSON EP-978 A3 machine was a new machine just released in September 2015. It increased the printing speed of the NFC and the artwork printing function by a little bit (along with the egg). It looks like the old machine has not changed much. The cartridge is still an IC80 cartridge, and the rest of 807 can continue to be used. Said the problem of this machine, EP978 A3 can only manually feed the back. EP-10VA can continuously feed paper. The reason for not buying is that compatible supplies have not been found to be sold yet. It is said that it is still under development. Fortunately, when the card was added, it was found that the price was reduced again.....
This time catching up with JCHERE Airlines took a single airline discount, but neglected the problem. Big boxes were taxed easily and honored a 10% tax.
Open a box, hey. Great box....My shipping.....
Hey.... or that kind of...
Open çž…çž…...
The front of the machine is still very beautiful and very handsome.
This little sign is NFC, and it hasn't been studied yet. In any case, it is also an egg.
The tray tray looks like 807.
Card slot, you are still a kind, Epson how lazy you are.
Finally there are different places, the scanning cover is two-section.
Lift it up to see .... wipe the A4 scanner! Epson you! ! !
Inside the machine, hey, almost .....
The paper-feeding tray is obviously better than the 807's high-grade ah, 807 that strip looks really simple, this much better.
The interface is basically the same, but it's pretty.
Try a picture.
Thick
Lift up 
The effect is good, the speed is obviously faster than 807, it is obvious.
Shaidan wrote here, since the new machine is handy, the preparation work has to be done well, and is the first to drive.
Driving Chinese articlesIn the previous article, I shared how to localize the driver. I also translated it, and I can basically use it. This time I changed the new machine and I'm going to finish it well. I can't just satisfy the normal use of the 807 driver. Come to a completely finished. Concerned about my meager mouse, ah, you can also add groups 187,937,721 to communicate together, the drive is still finished, translate well I released on the microblogging.
The print interface is similar to the 807. No difficulty to get started.
At present, Taobao's filled cartridges seem to have some unstable quality. Users in the group report that they have reset two or three times and can no longer reset the cartridges. They must be sure to look when buying ink cartridges.
With respect to ink, er, personal needs must be prevented from discoloration, and it must be waterproof. Only pigment inks can be used, and pigments can be easily plugged..... indeed, 807 is also doing so badly. However, I still use pigment ink for new machines.
Waste ink articlesMany printers on the Internet advertised waste ink tubes to guide the machine, but personally think that picking up a bottle is too easy to knock down on the outside. Perhaps I don't have much print. To lead the waste ink will disassemble, this machine structure is basically the same as 978, with the domestic and European version of the xp series of the structure is basically the same, there is no domestic disassemble diagram, so the picture has reference significance. Disassemble the machine is too much trouble and there are hidden screws, you need to prepare a long handle screwdriver, and some screws deep. Here are some pictures for everyone so that everyone can understand where waste ink pipes are.
This pipe can be seen without dismantling, and it's very long and extends to the front.
No, there is a clip, the tube is very long, it can be drawn directly through the hole in the shell. Of course, there are other ways to drain the ink tube. You can find it yourself on youtube. They stick a lid into the waste ink tank. Lead out, you can imagine it.
Change voltage
Many netizens feel that 110v voltage is still being used in China for dragging transformers, but also worry that the wrong ones will burn up the machine. I deliberately removed the EP-807 and found that the transformer part is basically the same as the domestic xp series. It should be bought. I can use it directly after replacement. I have not tested it and I am not responsible for it. Still on a few pictures, you judge yourself.
Unplug the wires
The shape of the power supply is like this, looking at the same kind of power supply as the xp series.
Take a look and see, uh, like this
Large capacitance is 200v is not directly for 400v or higher on the line, but also need to change parts do not? Welcome everyone to discuss.
To sum up, the domestic machine is expensive and the configuration is low. I really do not know what caused it. Haitao's machine will be difficult to repair because of various accessories. After disassembled, I discovered these Japanese machines and domestic ones. The internal structure of the machine and some of the components should be the same, but the difference in the program, so buy these machines back to maintenance should be no problem, I believe that more people to buy, people will share more experience. Domestic businessmen will also sell a variety of accessories and there will be no pressure to use them at that time. Domestic manufacturers have not been able to develop inkjet printers and are always subject to several major brands. These bear machines are so costly to maintain. Finally, there is a piece of advice for anyone who wants to buy an inkjet printer but the usage rate is very low: the inkjet printer is a pit, and it is necessary to be cautious when entering the pit .
Give everyone an early thanks in advance, congratulations on making a fortune
Like a little
Molded Waterproofing Cable Assemblies
We specialize in waterproofing products overmolding. We can custom build, custom mold, and over-mold your cable designs.
We specialize in molded cable manufacturing for the widest diversity of
cable and connector types, across the whole spectrum of industries. Rich expeirence in developing and proposing solution Special for IP67, IP68 waterproofing products.
Molded waterproofing cable assemblies, waterproof wire harness, waterproofing cables overmolding
ETOP WIREHARNESS LIMITED , http://www.oemwireharness.com