Environmental issues that should be noted when installing DH-300 - Database & Sql Blog Articles

300-04043

Spot Remarks 2017+

AVX tantalum capacitor TAJB106K016RNJ stock

1. It is recommended to place the device in an environment with a temperature of 20°C (68°F) and a humidity level of 50% for optimal performance.

2. The installation location should be away from direct sunlight, vibrations, wind, dust, and magnetic fields to ensure stable operation and prevent damage.

3. Make sure that the voltage being used matches the required voltage for your specific model to avoid electrical issues or damage to the unit.

â—† Install the windshield and position the machine inside it. This helps protect the device from external elements and ensures a controlled working environment.

â—† Level Adjustment: Use the adjustable feet to balance the machine. Adjust the feet until the bubble in the spirit level is centered within the black circle, ensuring the entire unit is perfectly level.

â—† Sink Installation: Fill the water tank with distilled water up to the top of the four frosted lines on the tank. After wiping away any excess water around the edges, carefully place the water tank into the two concave grooves on the main unit.

â—† Measurement Table Installation: Place the measurement table onto the measuring plate, aligning its four protrusions with the corresponding concave grooves on the plate. Ensure that the hanging bar is fully submerged in the water and does not touch the sink to maintain accuracy during measurements.

Following these steps will help ensure proper setup, stability, and accurate performance of the equipment. Always refer to the user manual for additional guidelines and safety precautions.