Matsushita Electric Works Co., Ltd. will release "Seamless Architectural Lighting Fixtures" using "Seamless Lights" on October 22, 2007.
When the same lamp is connected, since there is no socket part at both ends of the lamp, the lamp will not be disconnected, and since the two ends of the lamp are compact, the installation is also required. space.
Features:
(1) Seamless lights that are not cut off at both ends
The diameter of the lamp tube is 20mm. There are no plugs and seamless lights at both ends of the lamp tube. The connected lamps are evenly distributed from one end to the other. It is difficult to find shadows at the joints, and the connection of the lights is natural and beautiful.
Past products need to use overlapping combinations and other cumbersome methods at the connection point.
The lights at the junction of the seamless lights are continuous and uninterrupted.
(2) Space-saving slim and compact design
How to make lighting fixtures installed in buildings such as ceilings, walls, and pillars more compact is one of the lighting problems of the past. Compared with the old products of the company (Panasonic Electric Works) (Hf class), the section of the appliance is reduced by about 50%. The lamp itself is no longer conspicuous and can give a good The sense of space.
(3) The length and color of the lamps are further enhanced
The length of the luminaire is 560.860.1010.1260.1510mm and 5 lengths are available. Different lengths of luminaires can be combined to suit various building sizes. In addition, the lamp has two color temperatures (2800K, 3000K) and warm white (3500K), white (4200K), and white (5000K), which can be freely selected according to the requirements of interior decoration.
1 2 Next Page
Ripple Resistors,Power Resistors,Aluminum Shell Resistor
Yifa Stud Welding Equipment Co., Ltd. , http://www.yfweldingmachine.com